mirror of
https://github.com/phabrics/Run-Sun3-SunOS-4.1.1.git
synced 2026-04-29 11:02:59 -04:00
137 lines
4.7 KiB
Plaintext
137 lines
4.7 KiB
Plaintext
# $Id: SUN-ULTRA-1,v 1.2 2010/06/05 19:30:55 fredette Exp $
|
|
|
|
## SUN-ULTRA-1 - example tmesh commands to create a Sun Ultra-1
|
|
## machine:
|
|
|
|
## the Ultra-1 system controller, CPU, I/O bridge, and RAM:
|
|
##
|
|
sc0: tme/ic/stp2200
|
|
cpu0 at sc0 addr 0x1c000000000: tme/ic/stp1030 tick-frequency 167M fpu-type builtin fpu-compliance partial fpu-incomplete trap
|
|
sbus0 at sc0 addr 0x1fe00000000: tme/ic/stp2220
|
|
##
|
|
## NOTE THAT THE SIZE OF EACH ramN BANK CAN ONLY BE 32MB,
|
|
## OR 64MB, OR 128MB, OR 256MB. DO NOT USE ANY OTHER
|
|
## SIZES OR ADD MORE BANKS. ram0 MUST EXIST.
|
|
##
|
|
ram0 at sc0 addr 0x00000000: tme/host/posix/memory ram 32MB
|
|
#ram1 at sc0 addr 0x10000000: tme/host/posix/memory ram 32MB
|
|
#ram2 at sc0 addr 0x20000000: tme/host/posix/memory ram 32MB
|
|
#ram3 at sc0 addr 0x30000000: tme/host/posix/memory ram 32MB
|
|
|
|
## the SLAVIO devices:
|
|
##
|
|
flash0 at sbus0 slot 15 offset 0x0000000: tme/host/posix/memory rom "SUNW,501-3082-update7.bin"
|
|
zs0 at sbus0 slot 15 offset 0x1100000: tme/ic/ncr89c105/z85c30
|
|
zs1 at sbus0 slot 15 offset 0x1000000: tme/ic/ncr89c105/z85c30
|
|
nvram0 at sbus0 slot 15 offset 0x1200000: tme/host/posix/memory persistent my-sun4u-nvram.bin
|
|
clock0 at sbus0 slot 15 offset 0x1201ff0: tme/machine/sun4/clock type tme/ic/mk48t59
|
|
sc0 at sbus0 slot 15 offset 0x1300000
|
|
fdtwo0 at sbus0 slot 15 offset 0x1400000: tme/ic/ncr89c105/i82077
|
|
auxio0 at sbus0 slot 15 offset 0x1900000: tme/ic/ncr89c105/auxio
|
|
|
|
## the Aurora Personality Chip and CS4231:
|
|
##
|
|
apcdma0 at sbus0 slot 13 offset 0x0: tme/ic/stp2024 id 0x3
|
|
audiocs0 at apcdma0 codec: tme/ic/cs4231A
|
|
|
|
## the Sun type-4 keyboard and mouse:
|
|
##
|
|
kbd0 at zs1 channel A: tme/serial/keyboard type sun-type-4-us macros my-sun-macros.txt map sun-keyboards.txt rate 20
|
|
ms0 at zs1 channel B: tme/serial/mouse type mousesystems-5
|
|
|
|
## IF YOU DO NOT ATTACH kbd0 at zs1 channel A, THEN YOU MUST ATTACH
|
|
## sink0 at zs1 channel A, otherwise the PROM's keyboard poll never
|
|
## finishes:
|
|
##
|
|
#sink0 at zs1 channel A: tme/serial/sink
|
|
|
|
## ttya:
|
|
##
|
|
# comment the first line, and uncomment the following line if you
|
|
# aren't using the GTK-based display console. this will connect ttya
|
|
# to the master side of a pseudo-tty (in this case, /dev/ttyr0), which
|
|
# you can connect to using tip or some other serial communications
|
|
# program on the slave side (in this case, /dev/ptyr0):
|
|
#
|
|
sink1 at zs0 channel A: tme/serial/sink
|
|
#console0 at zs0 channel A: tme/host/posix/serial device /dev/ttyr0 break-carats
|
|
|
|
## the SBus esp SCSI:
|
|
##
|
|
esp0 at sbus0 slot 14 offset 0x8800000: tme/ic/lsi64854 revision "1+" channel scsi
|
|
esp0 dma at sbus0 slot 14 offset 0x8400000
|
|
ncr0 at esp0 master: tme/ic/ncr53c9x variant esp100
|
|
scsibus0 at ncr0: tme/scsi/bus
|
|
|
|
## the SBus LANCE Ethernet:
|
|
##
|
|
# uncomment the bpf0 line if you have read/write permission on one
|
|
# of your /dev/bpfN devices and you want actual network access:
|
|
#
|
|
ledma0 dma at sbus0 slot 14 offset 0x8400010: tme/ic/lsi64854 revision 2 channel ethernet
|
|
ledma0 at sbus0 slot 14 offset 0x8c00000
|
|
le0 at ledma0 master: tme/ic/am7990
|
|
#bpf0 at le0: tme/host/bsd/bpf
|
|
|
|
## the SBus parallel port:
|
|
##
|
|
bpp0 at sbus0 slot 14 offset 0xc800000: tme/ic/lsi64854 revision "1+" channel parallel
|
|
|
|
## an SBus cgsix:
|
|
##
|
|
## NOTE: the cgsix emulation is extremely poor; it's enabled
|
|
## by default only because NetBSD/sparc64 currently does not
|
|
## support a cgthree console. THIS WILL NOT RUN X:
|
|
##
|
|
cgsix0 at sbus0 slot 0 offset 0x0: tme/bus/sbus/cgsix type 501-2325
|
|
cgsixrom0 at sbus0 slot 0 offset 0x0: tme/host/posix/memory rom "SUNW,501-2325.bin"
|
|
|
|
## an SBus cgthree:
|
|
##
|
|
#cgthree0 at sbus0 slot 0 offset 0x0: tme/bus/sbus/cgthree
|
|
#cgthreerom0 at sbus0 slot 0 offset 0x0: tme/host/posix/memory rom "SUNW,501-1415.bin"
|
|
|
|
## an SBus bwtwo:
|
|
##
|
|
#bwtwo0 at sbus0 slot 1 offset 0x0: tme/bus/sbus/bwtwo
|
|
#bwtworom0 at sbus0 slot 1 offset 0x0: tme/host/posix/memory rom "SUNW,501-1561.bin"
|
|
|
|
## the GTK-based display console:
|
|
##
|
|
# comment out these lines, and the SBus framebuffer declarations
|
|
# above, if you don't have GTK or you don't want a display console:
|
|
#
|
|
display0: tme/host/gtk/display
|
|
display0 at cgsix0
|
|
#display0 at cgthree0
|
|
#display0 at bwtwo0
|
|
display0 at kbd0
|
|
display0 at ms0
|
|
|
|
## a SCSI disk:
|
|
##
|
|
#
|
|
sd0 at scsibus0: tme/scsi/disk id 0 type tme-scsi-1
|
|
disk0 at sd0: tme/host/posix/disk file my-sun4u-disk.img
|
|
|
|
## a SCSI tape:
|
|
##
|
|
st0 at scsibus0: tme/scsi/tape id 4 type tme-scsi-1
|
|
tape0 at st0: tme/host/posix/tape
|
|
|
|
## set the idle type, so tmesh doesn't consume all of the host CPU:
|
|
##
|
|
# use the appropriate type for the guest operating system:
|
|
#
|
|
# NetBSD/sparc64 1.6 through 4.99.19: netbsd64-type-0
|
|
# NetBSD/sparc64 4.99.21 through this writing: netbsd64-type-1
|
|
#
|
|
command cpu0 idle-type netbsd64-type-1
|
|
|
|
## power up the machine:
|
|
##
|
|
# uncomment this line to automatically power up the machine when
|
|
# tmesh starts:
|
|
#
|
|
#command sc0 power
|